Resin/Hardener

EpoxyHeads Resin Part A #7710 (qt.), #7712 (gal.) and #7714 (4 gal.)

EpoxyHeads Resin is the base material of the EpoxyHeads family of products and the first of several building blocks on which our solution package is based. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with EpoxyHeads Hardener, it will cure in a wide variety of temperatures to form a high-strength solid with excellent moisture resistance.

EpoxyHeads is designed specifically to bond with wood, fiberglass, reinforcing fabrics and a variety of metals and plastics. An excellent adhesive, EpoxyHeads will bridge gaps and fill voids when modified with our Thickener, High-strength Filler or Easy-sanding Filler. EpoxyHeads may be shaped and sanded when cured to create a custom repair for the desired result. When applied with a roller, it has excellent thin-film characteristics to flow out and self-level providing excellent moisture-proof coating.

EpoxyHeads is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than many similar products. When stored at room temperature and closed to prevent contamination, resin and hardener should remain usable for many years. Metered Pumps may be left in containers during storage. Repeated freeze/thaw cycles during storage may cause the resin to crystallize. Warming the resin to 125°F and stirring will dissolve crystals.
[Purchase Now]

EpoxyHeads Hardener Part B #7720 (1/2 pt.), #7722 (qt.) and #7724 (gal.)

EpoxyHeads Hardener is designed for use with EpoxyHeads Resin through our Metered Pumps. The pumps handle the ratio and the user simply adds one full pump stroke of hardener for each one full pump stroke of resin. When combined with EpoxyHeads Resin, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. This product is not intended for clear coating.

Maximum Strength @72°F...1 to 4 days         Minimum Recommended Temperature... 60°F
View the Typical Physical Properties of cured EpoxyHeads^® brand epoxy.
[Purchase Now]

 

Accessories

Metered Pumps #7801

EpoxyHeads Metered Pumps are designed for convenient and accurate metering of both smaller sized containers of Epoxy Resin and Epoxy Hardener. The pumps mount directly on the containers and eliminate the mess involved in measuring by weight or volume. The Metered Pumps are calibrated to deliver the proper working ratio with one full pump stroke of resin for each one full pump stroke of hardener. Made of durable polypropylene, the pumps are reusable and give years of reliable service.

The Metered Pump Set contains one resin pump and one hardener pump and is shipped to you fitted with extension tubes designed to fit the gallon-sized resin (#7712) and the quart sized hardener (#7722). The package also contains a set of shorter extension tubes designed to fit the quart size resin (#7710) and the 1/2 pint hardener (#7720). The 4-gallon resin (#7714) and the 1-gallon hardener (#7724) are shipped with the appropriate extension tubes enclosed.

Read the pump instructions carefully and keep them with the additional extension tube set in the event that you change package sizes at the time of your next purchase.
[Purchase Now]

Disposable Gloves #7803 (8 pr.) and #7805 (50 pr.)

Lightweight, seamless neoprene gloves are more chemically resistant than latex glove. They provide excellent protection while retaining good finger sensitivity and dexterity and are more puncture resistant than conventional gloves.

SBS Skin Cream #7811 (5 oz.)

Medicated skin cream to soothe minor skin irritation and help prevent dermatitis.

Epoxy-resistant Sleeves #7821 (2 pr.)

These convenient sleeves cover your arms to provide additional protection. Made of Tyvek^®, 18" sleeves with elastic top and cuff. Use with gloves and aprons for extra protection.

Epoxy-resistant Aprons #7823 (2 ea.)

Use these aprons to protect your clothing and work clean. Made of Tyvek and very durable.

Mixing Cups #7841 (16 oz., 6 ea.)

Cured epoxy pops right out of these reusable, heavy-duty plastic mixing pots. Convenient batch sizes for most projects.

Epoxy Mixing Multi-tool #7861 (8 ct.)

A practical mixing, application, filleting, and cleaning tool. Squared, beveled end reaches mixing pot corners for thorough mixing and blending in fillers and for cleaning up excess epoxy. Use rounded end to shape 3/8" radius fillets. Cured epoxy pops off easily, so they can be reused over and over.

Additives

Thickener #7750 (1.7 oz.) and #7752 (5.5 oz.)

EpoxyHeads Thickener is an additive used to control the texture of the epoxy and prevent runoff in vertical or overhead glue joints. This thickener is a very strong additive that creates a smooth mixture, ideal for general bonding. A very versatile thickener, it may be used in combination with fillers to improve strength and abrasion resistance resulting in a tougher, smoother surface. EpoxyHeads Thickener cures to an off-white color.
[Purchase Now]

High-strength Filler #7760 (6 oz.) and #7762 (20 oz.)

EpoxyHeads High-strength Filler is a fine fiber blend used as a thickening additive to create a multipurpose adhesive, especially for bonding wood. Epoxy thickened with this filler has good gap-filling qualities while retaining excellent wetting/penetrating capability. Cures to an off-white color.
[Purchase Now]

Easy-sanding Filler #7770 (2 oz.) and #7772 (5 oz.)

EpoxyHeads Easy-sanding Filler is the ideal low-density filler for creating a light, easily worked compound for leveling and fairing large areas. It mixes with ease and is much easier to sand than our other additives. It feathers to a fine edge and is more economical for large jobs. This filler is not recommended under dark paint or on surfaces subject to high temperature. Cures to a light tan color.
[Purchase Now]

Gray Pigment #7740 (4 fl. oz.)

EpoxyHeads pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for final finishing. The colored surface also tends to highlight flaws and imperfections. Cured pigmented epoxy surfaces are not a final finish, but require an additional paint or UV filter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one-teaspoon of pigment to 8 fl oz of epoxy. One 4-fl. oz. bottle of pigment will tint approximately 1.5 gallons of epoxy. To increase opacity, you can either add more pigment (up to 5%), or apply multiple coats of tinted epoxy. 

Application Tools

Variable-width Roller Frame #7851

Adjustable roller cover frame holds 7" full width covers and covers cut down to as narrow as 2" wide. Ideal for coating narrow strips and tight areas, as well as large areas.

Epoxy Roller Covers #7853 (7", 2 ea.)

Thin polyurethane foam roller covers are ideal for epoxy, paint and varnish application. The 7" wide covers may be cut into shorter widths to match the specific work area and cut into brushes for "tipping off" fresh coats of epoxy.

Glue Brushes #7871 (12 count, 1/2") and #7873 (144 count, 1/2")

Handy, disposable, 1/2 x 6" glue application brushes have a metal handle. These brushes are useful in a wide variety of small gluing and coating applications.

Syringes #7881 (12 cc, 2 ea.) and #7883 (12 cc, 12 ea.)

Reusable syringes that can be filled with epoxy mixture for injecting into tight spots and mechanical fastener holes. Ideal for hardware bonding and small repairs. Holds 12 cc (about 0.4 fl oz).

Flexible Plastic Spreader #7887 (2 ea.)

Flexible, 3.5" x 6" double-edged spreader for filling, flow coating, fairing and applying fiberglass cloth. Cured epoxy simply pops off these reusable spreaders.

Empty Caulking Tubes #7889 (10 fl. oz., 2 ea.)

These tubes are for use with standard caulking guns. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. May be refilled several times before epoxy begins to cure. Tubes can be refilled again once the cured epoxy is popped out. Holds approximately 10 fl. oz.

Reinforcing Fabric / Tape

Fiberglass Tape 6-ounce #7780 (3" x 10 ft.) and #7784 (3" x 50 yds.)

EpoxyHeads 6-ounce woven fabric tape is ideal for reinforcing corners, edges and similar structural applications. When bonded with EpoxyHeads Epoxy, it provides additional tensile strength to resist hairline cracks and abrasion.
[Purchase Now]

Fiberglass Cloth 6-ounce #7782 (30" x 42") and #7786 (30" x 15 ft.)

Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. Fiberglass cloth may also be used to provide an abrasion resistant covering for wooden structures. When saturated, the 6-oz fabric becomes transparent. May be painted or varnished.
[Purchase Now]